PADDLE WHEEL FLOW METER

Flow Indicator Totaliser / Batcher/ Transmitter 
It is an advanced, programmable flow indicating totalizer. It is used in conjunction with any flow transmitter to display flow as well as Totaliser / Batcher/ Transmitter flow.

• Pay Mode Terms: T/T (Bank Transfer)

Panel Mountable-ATN-P200, The ATN-P200 is a Panel mounted Flow totalizer using ATN400 insertion type Flow Sensor. It gives a digital readout of the flow in M3/Hr, LPH, LPM GPM also. These are the most user friendly meters, anybody can easily calibrate install them online without any technical knowledge. These meters use advanced micro controller to calculate the flow total.

Application:

1.   Low Cost

2.   Easy to Maintain

3.   Line Size: 15 mm – 300 mm

• Item Code: ATNP200
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1-2 WEEKS

Panel Mountable Paddle Wheel Flow Rate Indicator ATN-P100

Application:

1.   Low Cost

2.   Easy to Maintain

3.   Line Size: 15 mm – 300 mm

• Item Code: ATNP100
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1-2 WEEK

The ATN200F is a field mounted flow rate Totalizer using ATN400 insertion type Flow Sensor. It gives a digital readout of the flow in M3/Hr, LPH, LPM GPM also. These are the most user friendly meters, anybody can easily calibrate install them online without any technical knowledge. These meters use advanced micro controller to calculate the flow rate.

Application:

1.   Low Cost

2.   Easy to Maintain

3.   Line Size: 15 mm – 300 mm

• Item Code: ATNF200
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1-2 WEEK

Panel Mountable-ATNP200B, The ATN-P200B is a Panel mounted flow Batcher using ATN400 insertion type Flow Sensor. It gives a digital readout of the flow in M3/Hr, LPH, LPM GPM also. These are the most user friendly meters, anybody can easily calibrate install them online without any technical knowledge. These meters use advanced micro controller to calculate the flow Batch.

Application:

1.   Low Cost

2.   Easy to Maintain

3.   Line Size: 15 mm – 300 mm

• Item Code: ATNP200B
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1-2 WEEK

Panel Mountable-ATN-P300, The ATN-P300 is a Panel mounted flow Traansmitter using ATN400 insertion type Flow Sensor. It gives a digital readout of the flow in M3/Hr, LPH, LPM GPM also. These are the most user friendly meters, anybody can easily calibrate install them online without any technical knowledge. These meters use advanced micro controller to calculate the flow rate and total and Transmitting 4-20 Ma current.

Application:

1.   Low Cost

2.   Easy to Maintain

3.   Line Size: 15 mm – 300 mm

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1-2 WEEKS

Paddlewheel Flow Sensors is highly repeatable, reliable performance, rugged sensors & little or no maintenance. The Model ATN400 has open collector signal output (sink) and has a wide dynamic flow range of 0.5 to 5 m/s ( 0.3 to 20 ft/s ). The sensor use to measures liquid flow rates in full pipe. Sensors can be installed in 15 NB to 300 NB (0.5 to 12 in.) Line size. To install this sensor in process line, we offer different types of T-fitting. These T-fittings, which include “T” with threaded & flange end, weld adapter and block design to seat the sensor to the proper insertion depth into the process flow.
TECHNICAL SPECIFICATION:Flow Rate Range:0.5 to 5 m/s (1.6 to 16.4 ft./s)Pipe Size Range:15 NB to 300 NB (0.5 to 12 in.)Linearity:±1% of full rangeRepeatability:±0.5% of full rangeMin. Reynolds Number:4500Required Wetted PartsSensor Body:Polypropylene (black) or PVDF (black)SS 304 / SS 316O-rings:Viton / TeflonRotor Pin:Hastelloy C / Tungsten CarbideRotor:Black PVDF.Frequency:38 Hz per m/s nominal(11.6Hz per ft/s nominal)Supply voltage:10 to 24 VDC regulatedSupply current:<20 mA @ 10 to 24 VDCOutput Type:Pulse output ( NPN )Cable Length:5 m (16.4 ft.) StandardOperating Pressure:PP: max7 bar @ 25°CPVDF: max12 bar @ 25°CSS: max15 bar @ 25°COperating Temperature:PP: -10°C to 70°CPVDF: -10°C to 100°CSS: -10°C to 120°C
FLOW INDICATOR- TECHNICAL SPECIFICATIONFunction:Flow Rate IndicatorDisplay:           LED/LCD(Field)Supply Voltage:           95-270VAC / 110-300VDC / 12/24VDCLinearity:           ±1% of full rangeRepeatability:            ±0.5% of full rangeInputs:           ATN flow sensor (ATN400)Configuration Lock:Password protection.Calibration:           Using front membrane keysOutput:NillModel ATN F100  Cutout Size:92 mm X 92 mmDisplay Housing:IP65 for field mounting unit

Application:

1.   Low Cost

2.   Easy to Maintain

3.   Line Size: 15 mm – 300 mm

• Item Code: ATNF100
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1-2 WEEK

Field Mountable-ATN-F200R, The ATN-P200R is a Panel mounted flow rate Switch using ATN-400PP/SS insertion type Flow Sensor. It gives a digital readout of the flow in M3/Hr, LPH, LPM GPM also. These are the most user friendly meters, anybody can easily calibrate install them online without any technical knowledge. These meters use advanced micro controller to calculate the flow rate and Give Switching Out Put.

Application:

1.   Low Cost

2.   Easy to Maintain

3.   Line Size: 15 mm – 300 mm

• Item Code: ATNP200R
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1-2 WEEKS

Field Mountable-ATN-F300, The ATN-F300 is a field mounted flow Traansmitter using ATN400 insertion type Flow Sensor. It gives a digital readout of the flow in M3/Hr, LPH, LPM GPM also. These are the most user friendly meters, anybody can easily calibrate install them online without any technical knowledge. These meters use advanced micro controller to calculate the flow rate and total and Transmitting 4-20 Ma current.

Application:

1.   Low Cost

2.   Easy to Maintain

3.   Line Size: 15 mm – 300 mm

• Item Code: ATNF300
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1-2 WEEKS

The ATN-P300G is a Panel mounted GSM flow meter,using ATN400 insertion type Flow Sensor. It gives a digital readout of the flow in M3/Hr, LPH, LPM GPM also. These are the most user friendly meters, anybody can easily calibrate install them online without any technical knowledge. These meters use advanced micro controller to calculate the flow rate.

Application:

1.   Low Cost

2.   Easy to Maintain

3.   Line Size: 15 mm – 300 mm

• Item Code: ATNP300G
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1-2 WEEKS

The ATN-F200R is a field mounted flow rate Switch using ATN-400PP/SS insertion type Flow Sensor. It gives a digital readout of the flow in M3/Hr, LPH, LPM GPM also. These are the most user friendly meters, anybody can easily calibrate install them online without any technical knowledge. These meters use advanced micro controller to calculate the flow rate and Give Switching Out Put.

Application:

1.   Low Cost

2.   Easy to Maintain

3.   Line Size: 15 mm – 300 mm

• Item Code: ATNF200R
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1-2 WEEK

Field Mountable-ATN200FB, The ATN-F200B is a field mounted flow Batcher using ATN400 insertion type Flow Sensor. It gives a digital readout of the flow in M3/Hr, LPH, LPM GPM also. These are the most user friendly meters, anybody can easily calibrate install them online without any technical knowledge. These meters use advanced micro controller to calculate the flow Batch.

Application:

1.   Low Cost

2.   Easy to Maintain

3.   Line Size: 15 mm – 300 mm

• Item Code: ATNF200B
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1-2 WEEK