ULTRASONIC FLOW METER

Ultrasonic Flow Meter are micro-controller based full bore type Ultrasonic Flow Meters, especially used for various industrial applications. These flow meters accurately measures the flow rate of liquid in closed pipes.

Due to its simple & rigid design, the flow meter is an obstruction-less & maintenance free instrument in place of conventional mechanical Flow measuring devices.

The system is well suited to most environments. Programming of the flow meter is simple and can be accomplished with 4 keys available on the instrument, It provides access to an extensive range of diagnostic information. Electronet manufactures several flowmeter consoles to meet the specific requirements of various applications.
Features:

• Integral Transmitter suitable for harsh environments.
• Low maintenance no moving parts or flow obstructions translates into long-term stability.
• Very low minimum measurable flow velocity (0.003m/s).
• Self-adjusting transducer receiving circuit continually adapts for changing pipe parameters such as scaling or corrosion.
• Fast response to flow transients, tracks flow rate changes better than Electromagnetic meters.
• Battery powered operates for over 5 years.
• Unique housing design, rated to IP68.
• Flange /body formed as one integrated piece reduces possibility of leakage.
• On-board self-diagnostic function and fault indicator.

Benefits:

• High measurements precision.
• Long-term stability & accuracy over a wide range of conditions.
• High reliability and minimum maintenance requirements.
• Maintenance-free meter where no external power sources are available.
• Communications port permits transfer of data from remote stations to central HMI.

Applications:

• Process control and instrumentation.
• Replacing high maintenance mechanical flow meters.
• Measure flow rate and total flow in water networks.

• Item Code: UFM-6740
• Delivery Time: 2-3 WEEKS

ATNSIONIC -200C are Clamp-On Type Ultrasonic Flow Meters. As the sensor is clamped on to the outside of the pipe, it is immune to the process compatibility concerns of an in-line flow metering technology.

ATNSIONIC™ - 200C Clamp-On Ultrasonic Flow Meter operates using transit time measurement. By measuring the time it takes a sonic signal to travel a known distance with the flow stream and another signal traveling against the flow stream, it determines the velocity of the fluid being measured. With the sonic properties of the fluid and the pipe material factored in, users get an extremely repeatable accuracy on the volumetric flow rate being measured.

Because the transmitter can process the signal of one or two sensors, it ensures additional economy and the ability to compare or contrast two flow streams, if required. The product is ideal for users looking for a process measurement device that is easy to install and can maintain flow measurement for clean liquids.

ASIONIC 200C clamp-on ultrasonic flow meters can be installed without stopping the processor having cut into the pipeline. It is ideal for process measurement in applications where users previously had not installed an in-line flow meter and for applications where large line sizes or exotic materials are required for in-line measurement technologies.

Salient Features:

• Portability
• Compact Size and easy to use
• Non-invasive Clamp-on Technology
• No pressure drop, moving parts, leakage or corrosion
• Measurement independent of Fluid properties
• No pipe cutting or process interruption
• Wide Bi-directional Flow range

• Delivery Time: 3- 4 WEEKS